Home / Nitrogen
Products · Nitrogen generation

Make your own nitrogen.

On-site generators produce nitrogen from your existing compressed air, replacing cylinder and bulk liquid supply.

Compressed air Bed ABed B N₂on site
Up to 80%Lower cost than cylinder or bulk liquid, says J&J
1 to 3 yrsTypical payback, depending on usage
95% to 99.999%PSA purity range
24/7Supply on demand
Technologies

Pressure swing adsorption or membrane

Two routes to on-site nitrogen. The right one depends on the purity your process needs.

PSA (pressure swing adsorption)Membrane
How it worksCarbon molecular sieve beds in a two-bed alternating cycle for continuous outputHollow fibre membranes separate the gases
Purity95% to 99.999%95% to 99%
CharacterHighest purity rangeSimpler and more compact, with fewer moving parts
Suited toElectronics, pharmaceuticals, laser cutting, chemical processingTyre inflation, fire suppression, some food packaging, general inert atmospheres
An on-site nitrogen generator
Why generate on site

No deliveries, no rental, no reordering.

  • Supply on demand, with generators running up to 24/7
  • Removes delivery, rental and reordering costs
  • Safer: no high-pressure cylinders, cryogenic vessels or manual handling
  • Continuous real-time purity monitoring
  • Modular, scalable systems
  • Reduced transport emissions and liquefaction energy use
Applications

Where nitrogen is put to work

Food packaging

Modified atmosphere packaging.

Beverage

Blanketing and purging.

Laser cutting

Assist gas; 99.5%+ purity typically needed.

Electronics

Wave soldering and reflow ovens.

Chemical processing

Blanketing, purging, pressure testing.

Pharma and life sciences

Inert atmospheres, validation support.

Tyre inflation

Claimed to reduce fuel use and tyre wear.

Not listed?

Ask us about your process.

What we do

From consumption audit to ongoing maintenance

1

Consumption audit

Share monthly consumption figures for a payback model.

2

Cost analysis

Compare on-site generation with your current supply.

3

Specify

Compressor and air treatment specification for the generator.

4

Supply, install, commission

Generator supply, installation and commissioning, then ongoing maintenance.

Questions

Nitrogen FAQ

How much can on-site nitrogen save?

J&J state up to 80% lower cost than cylinder or bulk liquid nitrogen, with payback typically in 1 to 3 years depending on usage. Share your monthly consumption for a payback model.

Does the generator need compressed air?

Yes. Generators produce nitrogen from your existing compressed air, so compressor and air treatment specification is part of the job.

Send us your monthly nitrogen consumption.

We will build a payback model around your figures.